Cornhole

Directions to Build a Cornhole Game

  Cornhole Games are really pretty simple to build if you have the right tools

Here is a list of what you will need to build a bean bag set

You will need a 48"x48"x1/2″ or thicker sheet of plywood. The thicker the wood the more sturdy it will be. Also smoother the better.
4 - 2×4x8’s
screws

Ok here we go, Cut the sheet of plywood in two so you have 2- 2 foot by 4 foot pieces.

Cut your 2×4’s. You will need 4-48″s long for the sides and 4-21″s long for the fronts and backs

now lay a frame of 2 48″ boards with two 21″ boards in between them and lay the plywood on top.

Make sure all the edges are pretty flush and then screw down the plywood to the 2×4’s

Then from one end of the cornhole board measure down 9″s somewhere close to center and put a line then from a side measure over 12″s and put a line. You need to draw the lines out until they cross. That point is center for your hole. Now center that with your 6″ hole saw and drill your hole. If you dont have a hole saw then measure out 3″ around the cross you made and use a jig saw.

Now the Legs, Cut 2 12″ 2×4s and then fasten them to the inside frame at the end with the hole

now make your other Cornhole Board and go